Behringer KICK sampler groovebox powered portably with a USB-C power bank and a Birdcord PD→12V

How to Power the Behringer KICK with a USB-C Power Bank

Behringer announced their upcoming Behringer KICK, an open-source sampler groovebox. Many call it an MPC clone. The power specifications have already been released, so we already know it will be possible to power it portably from a USB-C power bank using a Birdcord PD➔12V, as shown in the setup diagram below. This means you can take it outside, use it in the park, on the train, or wherever you feel like.

Behringer KICK Sampler Groovebox powered portably with a USB-C power bank and a Birdcord PD→12V

Quick Facts: Behringer KICK Mobile Setup

DeviceBehringer KICK
Supply voltage12 V DC
Current drawmax. 2 A
Power consumptionmax. 24 W
Connector5.5 x 2.5 mm
PolarityCenter positive
Power sourceUSB-C power bank*
Compatible power converterBirdcord PD➔12V
StatusNot tested yet

*Note: Requires a USB-C power bank with USB Power Delivery (PD) support and a 12V output profile. The power rating should be higher than the power consumption.

What You Need

✅ Birdcord PD➔12V – A compact USB-C power cable that requests 12 V output from a compatible USB-C power bank and delivers it to the Behringer KICK. View product

✅ USB-C Power Bank – A power bank that supports USB Power Delivery (PD) and a 12V output profile. A minimum rating of 36 W and 10,000 mAh is recommended. Recommended: INIU 65 W 20,000 mAh USB-C PD Power Bank

✅ USB-C cable – To connect the power bank to the Birdcord PD➔12V (usually included with the power bank). View product

How It Works

The Behringer KICK requires a stable 12 V DC power supply. Since USB-C power banks don’t automatically provide the correct voltage, a Birdcord PD➔12V is needed to communicate with the power bank and request the right output voltage. The power bank then provides 12V DC, allowing the Behringer KICK to run directly from a portable battery.

Simply connect the Birdcord PD➔12V to a compatible USB-C PD power bank and plug the DC connector into the Behringer KICK. The setup works exactly like using the original power adapter, but gives you the freedom to perform anywhere.

Frequently Asked Questions (FAQ)

How long can the Behringer KICK run on a USB-C power bank?

A 20,000 mAh USB-C power bank will power the Behringer KICK for at least 2.5 hours. Possibly a lot longer. We will find out once they release it.

I already have a power bank. Will it work?

Yes, as long as it supports 12 V output. You can easily check this by looking at the technical specifications printed in small letters on your power bank. If you see an output listing like 12V⎓2A, 12V⎓3A (or anything similar), it is compatible and will work perfectly. If it only lists 5V, it is not compatible.

Can I power the Behringer KICK directly from USB-C?

No. The Behringer KICK requires 12 V DC power and cannot be powered directly from a standard USB-C output. A Birdcord PD➔12V is required to request the correct voltage from a compatible USB-C power bank.

How to choose a USB-C power bank for the Behringer KICK?

Choose a USB-C power bank with USB Power Delivery (PD) support and a 12 V output profile. Please note that not all USB PD power banks support 12 V output.

To check compatibility, look at the technical specifications of the power bank. The supported output voltages are usually listed as something like 5V⎓3A, 9V⎓3A, 12V⎓2.25A or similar. If 12V is listed as an output option, the power bank is compatible with the Birdcord PD➔12V.

A capacity of 10,000 mAh or higher and a power output of 36 W or higher are recommended for a reliable portable setup.

Dieter Höller

founder of Songbird FX